Siemens Desigo PXC4.E16 Скачать руководство пользователя страница 6

Страница: 6 / 16

6
Siemens Schweiz AG

A6V11646018_en--_e

Smart Infrastructure

2021-06-11

Product documentation

Related documents such as the environmental declarations, CE declarations, etc., can be
downloaded from the following Internet address:

https://siemens.com/bt/download

Notes

Safety

CAUTION

National safety regulations

Failure to comply with national safety regulations may result in personal injury and property
damage.

●

Observe national provisions and comply with the appropriate safety regulations.

Mounting position and ambient temperature

The devices can be snapped onto standard rails or screwed onto a flat surface.

Plug-in screw terminals connect power and interfaces.

Ambient temperature -5...50 °C (23...122 °F)

Ambient temperature -5...45 °C (23...113 °F)

●

Wall, horizontal

– From left to right

– From right to left

●

Overhead

●

Wall, vertically

– From top to bottom

– From bottom to top

●

On a horizontal surface

CAUTION

Risk of overheating for failure to comply with ambient temperature

Burning and damage to the device

●

Ensure sufficient ventilation to comply with the permissible ambient temperature within
the panel or installation box. The temperature must be at least 10 K (18° F) lower out-
side the installation box.

Содержание Desigo PXC4.E16

















Результаты поиска

Содержание Desigo PXC4.E16

Отзывы:

Бренды по названию

Популярные бренды

Siemens Desigo PXC4.E16, Руководство пользователя

Результаты поиска

Содержание Desigo PXC4.E16

Отзывы:

Бренды по названию

Популярные бренды