Siemens DELTA i-system, Инструкции по эксплуатации и монтажу, Страница: 45 / 128

45
Programming the switching times
6. Programming
6.1 Programming the switching times
Info: If an UP and a DOWN command are programmed to be executed on the same
weekday and at the same switching time, only the UP command will be executed.
Example: Mo 8.15 executed
Mo 8:15 not executed
1. Activating the programming mode:
Depress
Set
until prog is displayed.
With this key, programming can also be interrupted
during the programming of steps 1 - 7 .
In this case, the data are incomplete and not
stored.
2. Selecting the program memory
Use the or keys to select program memory
A
,
B
or
C
in which the new switching times are
to be stored.
Confirm your choice by depressing
Set
briefly.
The
shutter control timer ‘Komfort’ is now ready to
accept the input of new switching times.
Time
Setting the current data
Programming memory A
Programming memory B
Programming memory C Learning louver running time
Shifting astro times
Setting the sun / twilight value
GB