7
Please read the Operating Instructions carefully before using the appliance!
Safety information
■
Installation and first commissioning should only be undertaken by an authorized technician
according to the attached Assembly Instructions.
■
Repairs must only be undertaken by an authorized technician to exclude any potential risks
involved.
■
The continuous-flow heater must only be installed in a frost-free room.
■
The tap mixer and warm water pipe can get hot.
Keep children away from the appliance.
Your new appliance
■
The electronic “exclusive” continuous-flow heater warms water while it is passing through the
appliance.
■
The continuous-flow switches itself on and heats the water when the warm water tap is
opened. It switches itself off again when the water tap is closed.
How to operate the continuous-flow heater
Select the shower temperature
The basic setting for the water temperature after first commission-
ing or loss of electrical power is 40 °C.
■
The
rotary knob
is used to infinitely select the desired temper-
ature from 30 °C to 60 °C. The colored display lighting indicates the
temperature range during operation by means of blue or red hues.
Info:
The temperature shown in the display is the water temperature
inside the appliance; the temperature of the water leaving the tap
can vary from this due to heat losses in the pipework.
The Wellness Program
The “exclusive” continuous-flow heater offers you the option to set two Wellness programs.
These Wellness programs begin with a warm phase and end with a cold phase. The temperature
change stimulus achieved can lead to stimulation of the circulation and an increase in blood
flow. Whether and to what degree the Wellness programs are suitable for you can, when in doubt
(particularly in the case of existing medical conditions), be discussed with your doctor.
