©
Siemens AG 2003, E:\Auftrag\Siemens\Mobile
Phones\CX65 Ulysses\us\LA\CX65_Startup.fm
15
Getting started
VAR Language: Am
erican; VAR
issue date: 16-Februar-2004
left page (15)
of CX 65 Ulysses us-en, A31008-H7100-A1-1-7619 (24.03.2004, 11:03)
Getting started
Assembly
The telephone is packaged in dis-
mantled form and must be re-assem-
bled before use.
Your phone's
display and
the display
on the face-
plate are
delivered
with a
protective film
. Remove this
film before getting started.
In rare cases, the static discharge
may cause discoloration at the edges
of the display. However, this will dis-
appear within approx. 10 minutes.
Place the keyboard mat
1
in posi-
tion. Ensure that it is sitting accu-
rately in place.
Then place the faceplate
2
in posi-
tion by pressing it lightly until it
clicks onto the telephone.
To remove the faceplate, insert the
pin on the battery cover in the open-
ing, press it lightly
3
and turn it at
the same time
4
to open the lock.
1
CLIPit™ Covers
Before changing the keypad mat or face-
plate, switch the phone off.
The new keypad has an additional key
under the joystick to permit direct access to
the Internet information from the service
provider.
2
3
4