Configuration
9
Image parameter
36
Siemens AG
A6V10334045
22.12.2011
z
Preset image:
Choose OFF, Indoor, Outdoor, Tunnel and Casino, according to the
environment.
z
Automatic Exposure:
Controls the light intensity of the image. 2 types of specific application
conditions can be selected: Manual or AES (Automatic Electronic Shutter) by
the camera depending on your application environment. When use the Manual,
the Shutter speed is enabled to adjust
z
Level:
Set the level between 1 and 10 .
z
Brightness:
Adjust the brightness between 0 and 255.
z
Contrast:
Set the contrast level between 0 and 255.
z
Saturation:
Adjust the saturation between 0 and 255.
z
Shutter Speed:
Set the desired shutter speed between 1/25 and 1/10000 s. The shutter speed
can be set to 1/25, 1/50, 1/100, 1/120, 1/150, 1/200, 1/300, 1/500, 1/750,
1/1500, 1/5000 and 1/10000 s. The network camera will adjust the aperture to
the ambient light level.
z
Manual Gain:
Adjust the manual gain level between 0 and 24 dB. This function is available for
manual lenses only.
z
AWB:
Set the white balance values to meet the environment condition for best color
rendition.
“ON”: the color of camera is automatically adjusted according to external
lighting condition.
“OFF”: Adjustable by user manually, this is useful for some specific condition
which AWB may be unaffordable to perform correctly. You can set the current
R/B color temperature manually.
z
R Gain, GR Gain, GB Gain, B Gain, D Gain:
Adjust manual gain value of R Gain, B Gain between 0 and 255. This function
is available for manual lenses only.
z
Noise Reduction:
Select either “ON” or “OFF”.
z
Sharpness:
Increasing the sharpness value enhances the edges and small features in your
camera images. You can adjust the sharpness between 0 and 255. .
z
Backlight Compensation:
Set an area for backlight compensation. Backlight compensation is a function
that achieves the brightness of a selected area to an optimum image level. This
function is necessary when an auto iris lens tends to close due to an intense
light coming from back of object in the area wished to view so that areas
desired to see become dark and difficult to see. In this case, set the area so
that the portion wished to see enters the selected area. The area size is
roughly as follows.