en
Operating the appliance
16
1.
Press the on/off button to switch on the appliance.
2.
Fill the water tank.
3.
Set the specified type of heating, temperature and
duration for the calibration, then start the appliance.
"FullSteam – Steam cooking" on page 18
4.
Heat up the appliance following calibration.
Caution!
Enamel damage
Do not use the appliance if there is water on the
cooking compartment floor. Before using the
appliance, wipe away the water from the cooking
compartment floor.
5.
Dry the cooking compartment floor.
6.
Set the specified type of heating and temperature for
heating, then start the appliance.
7.
Keep the kitchen ventilated while the appliance is
heating.
8.
Stop the appliance once the specified time has
elapsed. Press the on/off button to switch off the
appliance.
9.
Wait for the cooking compartment to cool down.
10.
Clean the smooth surfaces with soapy water and a
dish cloth.
11.
Empty the water tank and dry the cooking
Notes
■
When relocating the appliance, restore its factory
settings once it is installed so that it can adapt to its
new location. Repeat the procedures for initial start-
up and calibration.
■
The appliance retains the calibration settings, even
in the event of a power cut or disconnection from the
mains. Calibration does not need to be repeated.
Cleaning the accessories
Clean the accessories thoroughly using soapy water
and a dish cloth or soft brush.
1
Operating the appliance
Operating the appliance
You have already learnt about the controls and how
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Switching the appliance on and off
Before you are able to set the appliance, you must
switch it on.
Exception: The childproof lock and the timer can be set
when the appliance is switched off.
Displays or information, e.g the residual heat indicator
in the cooking compartment, remain visible in the
display after the appliance has been switched off.
Switch off your appliance when you do not need to use
it. If no settings are applied for a long time, the
appliance switches itself off automatically.
Switching on the appliance
Use the on/off button to switch the appliance on.
The on/off symbol above the button lights up in blue.
The studioLine logo appears in the display, followed by
a type of heating and a temperature.
Note:
In the basic settings, you can specify which
operating mode should appear after the appliance is
switched on.
Switching off the appliance
Use the On/Off button to switch off the appliance.
The lighting above the button goes out.
A set function is cancelled.
The time appears in the display.
Note:
You can set whether or not the time should be
displayed when the appliance is switched off in the
basic settings.
Starting or interrupting operation
To start operation or to interrupt an operation which has
started running, press the Start/Stop button. The
cooling fan may continue to run after an operation is
interrupted.
Press the On/Off button to delete all settings.
If you open the cooking compartment door during
operation, operation is interrupted. Close the cooking
compartment door to continue operation.
Calibration
Type of heating
Steam
P
Temperature
100 °C
Cooking time
30 minutes
Heating up
Type of heating
4D hot air
:
Temperature
Maximum
Cooking time
30 minutes
Содержание CS858GR.6B
Страница 2: ......