Siemens CP 1243-7 LTE-EU Скачать руководство пользователя страница 62

Страница: 62 / 132

Configuration and operation

4.13 Security functions

CP 1243-7 LTE

Operating Instructions, 01/2015, C79000-G8976-C381-01

4.13.1.4

VPN communication with SOFTNET Security Client (engineering station)

Setting up VPN tunnel communication between the SOFTNET Security Client and CP has

essentially same requirements and procedure as described in the section Creating a VPN

tunnel for S7 communication between stations (Page 59).

VPN tunnel communication works only if the internal node is disabled

Under certain circumstances the establishment of VPN tunnel communication between

SOFTNET Security Client and the CP fails.
SOFTNET Security Client also attempts to establish VPN tunnel communication to a lower-

level internal node. This communication establishment to a non-existing node prevents the

required communication being established to the CP.
To establish successful VPN tunnel communication to the CP, you need to disable the

internal node.
Use the procedure for disabling the node as explained below only if the described problem

occurs.
Disable the node in the SOFTNET Security Client tunnel overview:
1.

Disable the option "Enable active learning" check box.
The lower-level node initially disappears from the tunnel list.

In the tunnel list, select the required connection to the CP.

With the right mouse button, select "Enable all members" in the shortcut menu.
The lower-level node appears again temporarily in the tunnel list.

Select the lower-level node in the tunnel list.

Select "Delete Entry" in the shortcut menu.

Result: The lower-level node is now fully disabled. VPN tunnel communication to the CP can

be established.

4.13.1.5

Connection to the telecontrol server

No VPN connection between CP and TCSB

For secure communication via a VPN tunnel, the communications partners are assigned to a

common VPN group. The configuration of a VPN connection between CP and TCSB is not

possible because the telecontrol server cannot be configured in STEP 7.
Thanks to the encrypted telecontrol protocol, the connection between the CP and telecontrol

server is already protected.

Содержание CP 1243-7 LTE-EU





































































































































Результаты поиска

Содержание CP 1243-7 LTE-EU

Отзывы:

Siemens CP 1243-7 LTE-EU, Руководство по эксплуатации, Страница: 62 / 132

Результаты поиска

Содержание CP 1243-7 LTE-EU

Отзывы: