CD3500 & CD4000 Installation and User manual
11
ENG
Setting codes
With Codoor you can program up to 9 different codes (codes 01-09). Follow
these steps:
Press
then enter the
6-digit
programming code.
Finish by pressing
. The red LED will flash slowly,
accompanied by simultaneous sounding of the buzzer.
Press
then enter the
code number
(01-09) you
want to program. Finish by pressing
. The red LED
will flash faster.
Press
then enter the desired
4-digit code
.
Finish by pressing
. The green LED will come
on for 2 seconds. To enter any additional
codes, repeat steps 3 and 4.
Exit programming mode by entering
00
. The
buzzer sounds a rising tone to confirm.
NoTE!
The unit automatically switches out of programming mode
into operating mode if no key is pressed within 10 seconds.
Programming must be done while the red LED flashes and the
buzzer sounds.
Delete code
Proceed like this:
Press
then enter the
6-digit
programming code
. Finish by pressing
. The red LED will flash slowly,
accompanied by simultaneous sounding
of the buzzer.
Press
#
, then
enter the code
(01 - 09) you wish to
delete. Finish by pressing
#
. The green LED will come
on. If you wish to delete more than one code, repeat step 3 for each
code.
Exit programming mode by entering
00
. The
buzzer sounds a rising tone to confirm.
1.
2.
3.
4.
1.
2.
3.
0
0
0
0
#
#
#
#
0
0
0
0
Содержание Codoor CD3500
Страница 2: ...Book contents English 3 Svenska 23 Deutsch 43 Français 63 ...
Страница 83: ......