en
Cleaning and servicing
24
▶
Remove all food remnants from the cooking com-
partment and the appliance door before you next
heat up the appliance.
If different cleaning agents are mixed together, there
may be a chemical reaction between these.
▶
Do not mix cleaning agents.
▶
Completely remove any cleaning agent residue.
New sponge cloths contain residues from production.
▶
Wash new sponge cloths thoroughly before use.
Suitable cleaning agents
Only use cleaning products that are suitable for the dif-
ferent surfaces on your appliance.
Follow the instructions on cleaning the appliance.
→
"Cleaning the appliance", Page 25
Appliance front
Surface
Suitable cleaning agents Information
Stainless steel
¡
Hot soapy water
¡
Special stainless steel
cleaning products
suitable for hot sur-
faces
To prevent corrosion, remove any patches of limescale, grease,
starch or albumin (e.g. egg white) on stainless steel surfaces imme-
diately.
Apply a thin layer of the stainless steel cleaning product with a soft
cloth.
Plastic or painted
surfaces
E.g. control panel
¡
Hot soapy water
Do not use glass cleaner or a glass scraper.
To avoid permanent stains, remove any descaling agent that gets
onto the surface immediately.
Appliance door
Area
Suitable cleaning agents Information
Door panels
¡
Hot soapy water
Do not use a glass scraper or stainless steel wool.
Tip:
Remove the door panels in order to clean them thoroughly.
Door cover
¡
Made of stainless
steel:
Stainless steel cleaner
¡
Made from plastic:
Hot soapy water
Do not use glass cleaner or a glass scraper.
Do not use stainless steel care products.
Tip:
Remove the door cover for thorough cleaning.
Stainless steel in-
terior door frame
Stainless steel cleaner
Discolouration can be removed using stainless steel cleaner.
Do not use stainless steel care products.
Door handle
¡
Hot soapy water
To avoid permanent stains, remove any descaling agent that gets
onto the surface immediately.
Door seal
¡
Hot soapy water
Do not remove or scrub.
Cooking compartment
Area
Suitable cleaning agents Information
Enamel surfaces
¡
Hot soapy water
¡
Vinegar water
¡
Oven cleaners
Soak any heavily soiled areas and use a brush or steel wool.
Leave the appliance door open to dry the cooking compartment
after cleaning it.
Notes
¡
It is best to use the cleaning function.
→
"Cleaning function Pyrolytic activeClean", Page 25
¡
Enamel burns at very high temperatures, causing minor discol-
ouration. The functionality of your appliance is not affected by
this.
¡
The edges of thin trays cannot be completely enamelled and may
be rough. This does not impair the corrosion protection.
¡
Food residues leave a white coating on the enamel surfaces. The
coating does not pose a health risk. The functionality of your ap-
pliance is not affected by this. You can remove residues with
lemon juice.