background image

CLSC3000 FCC 

Compliance 

 

 

Installation Manual, CLSC004enI3c 

©

 Siemens AG 2010 / Date of issue: 2010-05-19 

12-1

 

12 FCC 

Compliance 

 

Note! 

This equipment has been tested and found to comply with the limits 
for a Class A digital device, pursuant to Part 15 of the FCC Rules and 
meets all requirements of the Canadian Interference-Causing 
Equipment Standard ICES-003 for digital apparatus. 
 

These limits are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial environment. 
This equipment generates, uses, and can radiate radio frequency energy and, 
if not installed and used in accordance with the instruction manual, may 
cause harmful interference to radio communications. Operation of this 
equipment in a residential area is likely to cause harmful interference, in 
which case the user will be required to correct the interference at his own 
expense. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or 
more of the following measures: 

‰

 

Reorient or relocate the receiving antenna. 

‰

 

Increase the separation between the equipment and receiver. 

‰

 

Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected. 

‰

 

Consult the dealer or an experienced radio/T.V. technician for help. 

Siemens AG is not responsible for any radio television interference caused 
by unauthorized modifications of this equipment or the substitution or 
attachment of connecting cables and equipment other than those specified by 
Siemens AG. The correction of interference caused by such unauthorized 
modification, substitution or attachment will be the responsibility of the user. 
The use of shielded I/O cables is required when connecting this equipment to 
any and all optional peripheral or host devices. Failure to do so may violate 
FCC and ICES rules. 

Содержание CLSC3000















































Отзывы: