12 / 26
Siemens
HMI-LED
CB1P3946en
Building Technologies
HMI-LED page introduction
2013-08-19
3.5 Parameter list page
On the default page, press and hold key SET to enter the parameter list page.
Press key SET to enter the password page as below:
Press key UP/DOWN to change the value of each digit.
Press key ESC to switch among the digit positions.
Press key SET to confirm the password. If the password is correct, the parameter
list page will be displayed as below.
Press key UP/DOWN to scroll the parameter list on the screen. Then press key
SET to configure the selected parameter.
Press and hold key ESC to exit from the parameter list page and it will redirect to
the present value list page.
3.6 Alarm list page
The alarm list page will be displayed automatically to show the latest alarm when
an alarm occurs.
Only the latest alarm could be displayed on this page. When a new alarm occurs,
the new alarm code will replace the old one which will be moved the alarm history
page.
Entering password
Selecting parameter
Exit
