11 / 26
Siemens
HMI-LED
CB1P3946en
Building Technologies
HMI-LED page introduction
2013-08-19
Press and hold key SET on the default page to redirect to the parameter list page
and alarm history page. Press and hold key ESC to exit from the default page.
The workflow is as follows:
3.3.2 Parameter list page or alarm history page transition
Press and hold key SET on the default page to switch the screen display between
the parameter configuration page and the alarm history page.
Press key UP/DOWN on the parameter configuration page to change the value.
The workflow is as follows:
3.4 Present value list page
The predefined values will be displayed alternately if there is no operation within 5
minutes.
The first 5 present values in the value list can be displayed on the screen
alternately. The number of scrolled values can be defined (Max. 5).
On the default page, press and hold key UP/DOWN to switch to the value list page
(VL01 …VL50). Press key UP/DOWN to switch among the value list pages. Press
key SET to display the selected value.
Screen scrolling
Selecting present
value
