en
Cleaning
16
D
Cleaning
Cleaning
Caution!
Avoid damaging the appliance and the fittings.
■
Do not use abrasive, chloride or acidic cleaning
agents or solvents.
■
Do not use scouring or abrasive sponges.
Metallic surfaces may corrode.
■
Never clean shelves or containers in the dishwasher.
These parts may become deformed.
Cleaning the display
The change in temperature and humidity can cause the
controls to steam up.
Switch the clean lock on before cleaning.
Use a clean microfibre cloth for cleaning.
Cleaning the appliance interior
Proceed as follows:
1.
Pull out the mains plug or switch off the fuse.
2.
Take out the food and store in a cool location.
Place ice pack (if available) on the food.
3.
Clean the appliance with a soft cloth, lukewarm
water and a little pH-neutral washing-up liquid.
Caution!
The rinsing water must not run into the light
or through the drainage hole into the evaporation
area.
4.
Wipe the door seal with clean water and dry
thoroughly with a cloth.
5.
Reconnect appliance, switch on and put in food.
Cleaning the equipment
To clean, take the variable parts out of the appliance.
l
Odours
Odours
If you experience unpleasant odours:
1.
Pull out the mains plug or switch off the fuse.
2.
Take all food out of the appliance.
3.
Clean the inside.
4.
Clean all packages.
5.
Seal strong-smelling food to prevent odours from
forming.
6.
Switch the appliance on again.
7.
Place food in the appliance.
8.
Check whether odours are still occurring after
24 hours.
9.
Change the odour filter.
"Changing the odour filter" on page 16
Changing the odour filter
Replacement filters are available from your Customer
Service team.
1.
Open the filter holder with a slotted screwdriver.
2.
Remove the used odour filter and replace with a new
odour filter.
3.
Close the filter holder.
