manualshive.com logo in svg

Siemens as-interface ANALYSER 3RK1 904-3AB01, Руководство пользователя, Страница: 21 / 46

Поделиться
Скачать
Siemens as-interface ANALYSER 3RK1 904-3AB01 Скачать руководство пользователя страница 21

                          

   

         

AS-Interface Analyser 

Functions of the Analyser

s

Subject to reasonable modifications due to technical advances.

Printed in Germany

SIEMENS AG  ·  Low-Voltage Controls ·  Phone +49 911 895 59 00  ·  Fax +49 911 895 59 07  ·   Internet: http://www.siemens.com/lowvoltage/technical-assistance

iss

ue da

te

 23.

8.

2006

21

Fig. 7:

With the protocol description a complete documentation of the actual condition of the 
facility is possible. The picture shows the summary of the protocol's first page.

You can reach the protocol in two ways:

• Either after the test run over the main menu "

File / Protocol edit

". The protocol 

contains the won data already.

• Or before a test run over the main menu "

Measure / Test assistant

". Here a 

new statistics is started. The intended measuring time can be entered directly. 
At its expiration the protocol sheet appears.

If several protocols are provided without a restart the data once entered manually 
are adopted. In particular the 

description of facility

 does not need to be entered 

a second time. That works also if a protocol which has been already stored (see 
below) is loaded.

This will ease your work substantially, but it can lead to an incorrect 
documentation if used imprudently. Example: the stored protocol of a 
facility is used as basis for the protocol of another facility. The soft-
ware cannot examine manual entries!

Frequently recurring entries (such as examiners name etc.) can be 
put down in a standard protocol which is called by the program cat-
egorically. It must be stored under the file name "default.ptx" in the 
directory in which the evaluation software is located.

Содержание as-interface ANALYSER 3RK1 904-3AB01















































Отзывы:

Нет отзывов