manualshive.com logo in svg

Siemens as-interface ANALYSER 3RK1 904-3AB01, Руководство пользователя, Страница: 11 / 46

Поделиться
Скачать
Siemens as-interface ANALYSER 3RK1 904-3AB01 Скачать руководство пользователя страница 11

                          

   

         

AS-Interface Analyser 

Functions of the Analyser

s

Subject to reasonable modifications due to technical advances.

Printed in Germany

SIEMENS AG  ·  Low-Voltage Controls ·  Phone +49 911 895 59 00  ·  Fax +49 911 895 59 07  ·   Internet: http://www.siemens.com/lowvoltage/technical-assistance

iss

ue da

te

 23.

8.

2006

11

5

Functions of the Analyser

5.1

Overview

The Analyser is a "listener" in the AS-Interface network. It controls the message 
traffic and evaluates it without intervening. The results are stored in the analyser, 
then transmitted to a PC or notebook where it can be analysed and displayed.

The analyser listens and evaluates all signals (including incorrect signals) on the 
AS-Interface line. So he can "hear" more than the most masters and especially 
then any superior control.

This is used for logging the net status, for error analysis, and for the optimization 
of the network and application.

Fig. 1:

The functions of the three operating modes.

Contrary to master and slave the analyser does not send telegrams. 
it does not have permanent memory for the determined data and is 
exclusively dependent on that what happens in the net.
It has got neither an address nor it keeps the configuration after 
switching off. It is completely independent of data which are stored 
in the master or an application program. The user has to consider 
this evaluating the results.

Содержание as-interface ANALYSER 3RK1 904-3AB01















































Отзывы:

Нет отзывов