Siemens Ardoptix PT 140 AF1 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 68

Siemens Ardoptix PT 140 AF1 Скачать руководство пользователя страница 10

s

Operating manual

2

2

Miscellaneous

2.1

Informationen about this manual

The  Operating  Manual  shall  enable  the  user  to  properly  install  the
pyrometer and those accessories which are necessary.

Before  starting  installation,  be  sure  to  read  and  understand  this  entire
manual, in particular the chapter on safety! The instructions contained in
this  manual,  especially  those  concerning  safety,  as  well  as  site-specific
regulations governing UV radiation must be complied with at all times!

2.2

Explanation of symbols

Important safety-related references in this manual are marked with a
symbol.

CAUTION!

This symbol indicates important information which, if neglected, might
result in pyrometer damage, malfunction or breakdown.



PLEASE NOTE !

This symbol points out guidelines which should be heeded for efficient
and trouble-free operation.

2.3

Liability and Warranty

All information compiled in this manual is in accordance with applicable
regulations. The statements made are based on state-of-the-art technol-
ogy and reflect our extensive knowledge and many years of experience.



PLEASE NOTE !

Always carefully read this Operating Manual before beginning any
work on or with the instrument, especially prior to installation and
initial  setup!  The  Manufacturer  shall  not  be  held  liable  for  any
damages or malfunctions arising from a disregard of the warnings
and instructions contained herein.

This Operating Manual must be retained for future use. Please ensure
that all persons who wish to operate the instrument have access to this
manual.

«
...
8
9
10
11
12
...
»

Содержание Ardoptix PT 140 AF1





































































Отзывы:

Нет отзывов