GAMMA
instabus
Technical Product-Information
August 2017
Control Module Box AP 118
5WG1 118-4AB01
Siemens AG
AP 118, page 1 / 6
Technical Manual
Infrastructure and Cities Sector, Building Technologies
Control Products and Systems
© Siemens AG 2017
Update: http://www.siemens.com/gamma
P. O. Box 10 09 53, D-93009 Regensburg
Subject to change without further notice.
2.4.2.11/1
Product- and Applications Description
The AP 118 Control Module Box with a height of 41 mm
is designed for installation in a false ceiling, in a raised
floor, directly on a wall or in an installation channel or
raceway. The Control Module Box is affixed with screws
at the two ends of the housing.
The Control Module Box offers one mounting location for
these modules:
5WG1 260-4AB23
Binary input, quadruple,
AC/DC 12...230V
5WG1 510-2AB23
Binary output (relay), 2 x 10A
5WG1 512-4AB23
Load switch (relay), 1 x 16A
5WG1 520-2AB23
Blind / shutter actuator, 1 x 6A
5WG1 521-4AB23
Blind / shutter actuator, 2 x 6A
5WG1 525-2AB23
Universal dimmer, 1 x 250VA
The mounted module is connected to the bus line via a
bus terminal block.
The AP 118 Control Module Box provides wiring space
with room for two connectors for PE and N conductors.
This allows for secure connection of the PE and N con-
ductors of the cables inserted into the AP 118 Control
Module Box.
For strain relief, cables can be secured at the entrance to
the wiring space.
Line voltage supply and load conductors are terminated
at the terminals of the mounted modules.
Application Programs
Requires no application programs
Example of Application
figure 1: Example of Application
Installation instructions
∂
The Control Module Box may be used for permanent
interior installations, for mounting in dry rooms, in
false ceilings, raised floors, and installation channels or
raceways.
Υ
DANGER
∂
The Control Module Box must be mounted and com-
missioned by an authorized electrician.
∂
A safety disconnection of the Control Module Box must
be possible.
∂
For planning and construction of electric installations,
the relevant guidelines, regulations and standards of
the respective country are to be considered.
