manualshive.com logo in svg

Siemens AC65, Руководство пользователя

Поделиться
Скачать
Siemens AC65 Скачать руководство пользователя страница 66

Java User’s Guide

9.4 Run on the Module with Autostart

66

s

wm_java_usersguide_v12

Page 66 of 123

2008-02-25

Confidential / Released

9.4

Run on the Module with Autostart

•

Compile the application at the prompt as discussed in 

Section 9.2

 or in an SMTK integrated

IDE. 

•

Transfer the .jar and .jad file from the development platform to the desired directory on the
module using the Module Exchange Suite or OTA provisioning. See 

Chapter 7

.

9.4.1

Switch on Autostart

•

There is an AT command, 

AT^SCFG

, for configuring the autostart functionality. Please refer

to 

[1]

.

•

Restart the module.

9.4.2

Switch off Autostart

There are three methods for switching off the autostart feature:
•

the AT^SCFG command, or 

•

the graphical “autoexec_off.exe“ tool (included in the Installation CD software under wtk/
bin), or 

•

the command line “cmd_autoexec_off.exe“ tool (included in the Installation CD software
under wtk/bin).

To disable the automatic start of a user application in a module these steps must be carried out:

Using the graphical “autoexec_off.exe” tool:

1. Connect the module to the PC
2. Make sure, that the module is switched off
3. Start the “Autoexec_Off” program
4. Select the COM-Port
5. Press the “AutoExec Off” button

Using the command line tool  “cmd_autoexec_off.exe”:

1. Connect the module to the PC
2. Make sure, that the module is switched off
3. Start the command line tool “cmd_autoexec_off” with option <com-port> (com1 up to

com99 for com port selection)

Содержание AC65




























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды