right page (11)
of A75_Libra, fcc, us-en, (30.05.2005, 10:36)
© Sieme
ns
A
G
200
4,
C:
\S
iemen
s\
D
TP-S
atz\
Pro
dukte
\A
75_L
ibra_
2\o
ut
put
\S
U
G
\A
75_
Libra
_FCC
_us-
11
Switch on/off, PIN entry
VA
R
Langu
age:
am;
V
A
R issue dat
e:
0503
24
Charging the battery
The battery is not supplied fully charged.
Plug the charger cable into the bottom of
the phone, plug the power supply unit
into a mains power socket and charge for
at least
two hours
.
Charging time
The charging time is 2 hours. Charging is
only possible within a temperature range
of +5°C to +40°C (+41°F to +104°F) If the
temperature rises/falls 5°C above/below
this, i.e drops to 32°F or rises to 113°F,
the charge symbol flashes a warning.
Switch on/off, PIN entry
Switch on/off
Press and
hold
On/Off/End key
B
to
switch on or off.
Enter PIN
The SIM card can be protected with a
4 - 8 digit PIN. Enter the PIN code using
the number keys (the display shows a se-
ries of asterisks, if you make a mistake
press
§Clear§
). Confirm your input with
§OK§
.
Logging on to the network will take a few
seconds.
First time switching on phone, the time
and date must be set.
Standby mode
When the name of the service provider/
logo appears on the display, the phone is
in standby mode
and
ready for use
.
Press and
hold
the On/Off/End key
B
to
return to standby mode from any menu
option.
Security
The phone and SIM card are protected
against misuse by several security codes.
Keep these confidential numbers in a safe
place where you can access them again if
required.
§Menu§
¢
m
¢
Security
¢
Codes
¢
Select a function.
PIN control
The PIN is usually requested each time
the phone is switched on. You can deacti-
vate this feature but you risk unauthor-
ised use of the phone. Some service pro-
viders do not permit deactivation of the
control.
Change PIN
You can change the PIN to any 4 - 8 digit
number you may find easier to remember.
Change PIN2
(Displayed only if PIN2 is available.)
Proceed as with
Change PIN
.
Change phonecode
You define and enter the phone code
(4 - 8 digits) when calling a phone code
protected function (e.g.
Direct call
, p. 13)
for the first time. It is then valid for all
protected functions. If it is entered incor-
rectly three times the phone is locked.
Contact the Siemens Service.
Clear SIM card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter the
PUK (MASTER PIN) provided by your serv-
ice provider with the SIM card. If the PUK
(MASTER PIN) has been lost, please con-
tact your service provider.
Prevent accidental activation
Even if PIN use is deactivated con-
firmation is required to switch on the
phone. This prevents accidental activa-
tion of the phone, e.g. when you are
