Siemens A30853 Скачать руководство пользователя страница 26

Страница: 26 / 62

Convenient and secure telephone communication

kap01.fm5

27.11.98

Profiset 30isdn engl.: A30853-X300-B107-1-7619

Parking a call

You can temporarily park a call in order to

●

reactivate it at a later stage

●

resume it at another telephone

●

unplug your telephone from one socket and plug it

into another

The telephone must not be parked for more than three

minutes, as otherwise the call will be disconnected.

Resuming a parked call

You can resume a parked call from the same telephone or

from a different telephone (it must be connected to the

same S

bus).

Prerequisite: A call is parked and you are not conducting a

call.

A call is in progress.

S04

Press the

Programming

key and enter the code “04“ for

“Parking a call“.
The stored connection code is indicated on the display.
The connection code is a number under which the call

can be parked and later resumed.
If the call is to be parked under a different connection

code, the connection code must have been changed

beforehand (

➔

page 34).

and

Press the

Programming

key again and replace the hand-

set.

The call is now parked for a maximum period of 3 minutes.

A call can only be parked, if is connected to the

same S

bus.

Handset is on-hook.

S04

Press the

Programming

key and enter the code “04“ for

“Parking/resuming a call“.
The connection code is indicated on the display. If the call

was parked under a different connection code, change

the connection code beforehand (

➔

page 34).

and

Press the

Programming

key again and lift the handset.

You are now re-connected to the parked caller.

You can cancel a programming procedure

without making any changes by pressing the

Disconnect

key

Содержание A30853































































Результаты поиска

Содержание A30853

Отзывы:

Похожие инструкции для A30853

Бренды по названию

Популярные бренды

Siemens A30853, Руководство по эксплуатации

Результаты поиска

Содержание A30853

Отзывы:

Похожие инструкции для A30853

Бренды по названию

Популярные бренды