Siemens 9700 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 45

Siemens 9700 Скачать руководство пользователя страница 6

9,

32:(50(7(5,167$//$7,21$1'%$6,&6(783

Siemens maintains control of all specifications for the SEABus and SEABus Plus protocols. A modification to a protocol for
any type of device must be approved by Siemens Energy & Automation, Inc. to guarantee compatibility. Any changes made
must be backward compatible so that existing products can coexist on the communications bus without having to support the
newer features of the protocol.

Siemens continuously strives to ensure backward compatibility, reliability, and easy implementation of both protocols to meet
current market communications requirements. Siemens therefore reserves the right to make improvements including
changes to specifications at any time without notice or obligation.



2000 Siemens Energy & Automation, Inc.

SIEMENS is a registered trademark of Siemens AG. ACCESS, WinPM, Static Trip III, SAMMS, SEABus, ISGS, and
Isolated Multi-Drop are trademarks of Siemens Energy & Automation, Inc. DIGSI is a registered trademark of
Siemens Energy & Automation, Inc. Windows is a trademark and Microsoft a registered trademark of Microsoft
Corporation. All other product names mentioned herein are used for identification purposes only and may be
trademarks of their respective companies.

«
...
4
5
6
7
8
...
»

Содержание 9700














































Отзывы:

Нет отзывов