manualshive.com logo in svg

Siemens 8DB10, Инструкция по установке и эксплуатации, Страница: 91 / 214

Поделиться
Скачать
Siemens 8DB10 Скачать руководство пользователя страница 91

 864-5091.9 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DB10 • Revision 06

91/214

Installation

                                                                                                                                                         

➭ Refasten the cover of the panel connection housing ④ with 11 bolt-and-washer 

assemblies M8x40 (tightening torque: 20 Nm).

Fig. 98:

Fastening the cover with the plug sockets

The earthing cable is either pre-assembled at the subframe, or fastened to the subframe 
with cable straps.

➭ Bolt the earthing cable to the subframe if the earthing cable is not pre-assembled. 
➭ Bolt the earthing cable ⑭ with an hexagonal bolt  M8x40 (with plain washer and spring 

washer) to the cover of the panel connection housing (tightening torque: 20 Nm).

➭ Repeat the above work operations for all other panel connections in the same panel.
✔ The panel connections are assembled.

Replacing

desiccant bags in the

circuit-breaker housings

The desiccant bags are located behind the cover of the bursting disc at the side of 
the circuit-breaker housing. The cover has the inscription "Filter".

Fig. 99:

Cover of bursting disc on circuit-breaker housing

①

Cover of bursting disc

ATTENTION

In the ambient air, the desiccant bags lose their effectiveness rapidly and cannot be used 
anymore.

➭ Use only desiccant bags whose packing is not damaged and whose humidity indicators in 

the packing are 

blue

.

➭ Do 

not

 use desiccant bags if the humidity indicators are 

pink

.

➭ After opening the packings, mount the desiccant bags in the gas compartment within 

30 minutes and close the gas compartment hermetically.

Содержание 8DB10























































































































































































































Отзывы:

Нет отзывов