Siemens 7VV3003-5AG32, Руководство по эксплуатации

Страница: 17 / 32

04.05 4 - Shipment, unpacking, installation
Siemens AG 7VV3003-8TA74
ENGLISH 17
SICROWBAR 7VV3003 DC-Surge Suppressor Operating Instructions
4 Shipment, unpacking, installation
4.1 Shipment, unpacking
The devices are packed in the production works according to the relevant ordering data. A product
packing label is attached to the box.
Protect the package against severe jolts and shocks during shipment, e.g. when setting it down.
Carefully observe the information on the packaging relating to transportation, storage and proper
handling.
The device can be installed after it has been unpacked and the shipment checked for
completeness and/or damage.
The packaging materials consist of cardboard and corrugated paper and can be disposed of
according to locally applicable waste disposal regulations.
If you discover that the converter has been damaged during shipment, please inform your shipping
agent immediately.
4.2 Storage
The units must be stored in clean dry rooms. Temperatures between
−
25 °C (
−
13 °F) and + 70 °C
(158 °F) are permissible. Temperature fluctuations > 20 K per hour are not permissible.
4.3 Installation, Dimension diagrams
CAUTION
Failure to lift the converter in the correct manner can result in bodily injury and/or property
damage.
The device must always be lifted by properly trained personnel using the appropriate
equipment (i.e. protective gloves, etc.).
To preclude the risk of deformation damage to the housing, the lifting lugs used to raise them
must not be subjected to any horizontal forces.
The user is responsible for installing the converter according to safety regulations (e.g. DIN,
VDE), as well as all other relevant national or local regulations regarding cable dimensioning
and protection, grounding, isolating switch, overcurrent protection, etc.
The converter must be installed in accordance with the relevant safety regulations (e.g. DIN,
VDE), as well as all other relevant national and local regulations. It must be ensured that the
grounding, cable dimensioning and appropriate short-circuit protection have been
implemented to guarantee operational safety and reliability.
Requirements for the installation site:
Operating facilities must be dry and dust-free. Air fed in must not contain any gases, vapors or
dusts that are electrically conductive or detrimental to functioning. Air containing dust must be
filtered.
The unit’s ambient climate in operating rooms must not exceed the values of code 3K3 as detailed
in DIN IEC 721 Part 3-3 /04.90.
CAUTION
The device must be mounted on a grounded back panel.