background image

 

SD73 

WARRANTY 

 
(a) Seller warrants that on the date of shipment the goods are of the kind and quality described herein and 
are free of non-conformities in workmanship and material.  This warranty does not apply to goods 
delivered by Seller but manufactured by others.   
 
(b) Buyer's exclusive remedy for a nonconformity in any item of the goods shall be the repair or the 
replacement (at Seller's option) of the item and any affected part of the goods.  Seller’s obligation to repair 
or replace shall be in effect for a period of one (1) year from initial operation of the goods but not more 
than eighteen (18) months from Seller’s shipment of the goods, provided Buyer has sent written notice 
within that period of time to Seller that the goods do not conform to the above warranty.  Repaired and 
replacement parts shall be warranted for the remainder of the original period of notification set forth above, 
but in no event less than 12 months from repair or replacement.  At its expense, Buyer shall remove and 
ship to Seller any such nonconforming items and shall reinstall the repaired or replaced parts.  Buyer shall 
grant Seller access to the goods at all reasonable times in order for Seller to determine any nonconformity 
in the goods.  Seller shall have the right of disposal of items replaced by it.  If Seller is unable or unwilling 
to repair or replace, or if repair or replacement does not remedy the nonconformity, Seller and Buyer shall 
negotiate an equitable adjustment in the contract price, which may include a full refund of the contract 
price for the nonconforming goods. 

 

(c) SELLER HEREBY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, EXCEPT THAT 

OF TITLE.  SPECIFICALLY, IT DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY, 

FITNESS FOR A PARTICULAR PURPOSE, COURSE OF DEALING AND USAGE OF TRADE.   

(d) Buyer and successors of Buyer are limited to the remedies specified in this article and shall have no 
others for a nonconformity in the goods.  Buyer agrees that these remedies provide Buyer and its successors 
with a minimum adequate remedy and are their exclusive remedies, whether Buyer's or its successors’ 
remedies are based on contract, warranty, tort (including negligence), strict liability, indemnity, or any 
other legal theory, and whether arising out of warranties, representations, instructions, installations, or non-
conformities from any cause.  
 
(e) Note:  The above does not apply to any software which may be furnished by Seller.  In such cases, the 
attached Software License Addendum applies. 
 
 
For warranty and non-warranty service, see the Customer/Product Support section of this manual. 
 
 
 
 
 
 
 
 
 

All product designations may be trademarks or product names of Siemens Energy & Automation, Inc. or other supplier 
companies whose use by third parties for their own purposes could violate the rights of the owners. 
 
Siemens Energy & Automation, Inc. assumes no liability for errors or omissions in this document or for the application and use 
of information in this document.  The information herein is subject to change without notice. 
 
Procedures in this document have been reviewed for compliance with applicable approval agency requirements and are 
considered sound practice. Neither Siemens Energy & Automation, Inc. nor these agencies are responsible for product uses not 
included in the approval certification(s) or for repairs or modifications made by the user. 

 

 

9

Содержание 73N












Отзывы: