Siemens 6DR63 Series, Руководство по эксплуатации

Страница: 35 / 204

SITRANS VP300 (6DR63..)
A5E03359515-01, 03/2011
33
Without explosion protection With explosion protection Ex "ia", "ic",
"nA"
Alarm module 6DR6003-8A 6DR6003-6A
● Connected loads
- U
o
= ≤ 5.9 V
I
o
= ≤ 0,2 mA
P
o
= ≤ 1,2 mW
C
o
= ≤ 1 μF
L
o
= ≤ 1 mH
Test voltage DC 840 V, 1 s
1)
Switching thresholds for supply to EN 60947-5-6: U
H
= 8.2 V, R
i
= 1 kΩ)
Position feedback module
Without explosion protection With explosion protection Ex "ia", "ic",
"nA"
Position feedback module 6DR6003-8J 6D6003-6J
1 DC output for position feedback 2-wire connection
Rated signal range 4 ... 20 mA, protected against polarity reversal
Dynamic range 3,6 ... 20.5 mA
Fault current
1)
2.4 to 3.6 mA
External load R
B
[kΩ] ≤ (U
H
[V] - 12 V)/i [mA]
Transmission error < 0,3 %
Temperature influence ≤ 0.1%/10 K
Resolution < 0,05 %
Ripple content < 0,1 %
For connecting to circuits with the
following peak values
See Chapter Electrical specifications (Page 28)
Galvanic isolation Electrically isolated from the basic device
Test voltage DC 840 V, 1 s
1)
In case of device fault or failure of setpoint power I
w
Appendix
Certificate
The certificates can be found on the enclosed CD and on the Internet under:
SITRANS VP300 certificates on the Intern)
Technical support
Technical Support
You can contact Technical Support for all IA and DT products:
●
Via the Internet using the Support Request:
Support reque)
● E-mail ( )
● Phone: +49 (0) 911 895 7 222
● Fax: +49 (0) 911 895 7 223
Further information about our technical support is available in the Internet at
Technical Support ( )