Transport, storage and packing
8
9229 9923 176 0B
2013-09-09
Transporting without pallet
•
Removing tensioning belts.
•
Remove accessory pack, if applicable, and store safely in the packaging for
later attachment.
•
Hang sling gear into the crane eyes.
•
Carefully lift vacuum circuit-breaker module.
•
Transport to installation site or leave suspended from crane for further work
steps.
Reusing the transport unit
Reusing the transport unit
To transport the vacuum circuit-breaker module again, the pallet with carton and
most of the components can be reused.
Do not reuse severed tensioning belts or plastic wrap.
Pack the vacuum circuit-breaker module in reverse order:
•
If the transport bracket was already removed, re-mount in reverse order (see
“Delivery state with transport bracket” on page 36). The transport bracket serves
to lock the withdrawable part in place in the cartridge insert during transport.
•
Attach the vacuum circuit-breaker module safely to the pallet using the appropri-
ate tools.
•
Cover with film and seal with adhesive tape.
•
Attach accessories pack.
•
Attach carton securely to the pallet floor.
•
Before returning to the factory, ask the responsible sales representative for a
returned goods number (see also “Service”, on page 51).
•
When returning a vacuum circuit-breaker module, always indicate the type and
serial number (see “Rating plate” on page 27).
Fig. 5
Removing the tensioning belts
Fig. 6
Lifting the vacuum circuit-breaker module
Note
If necessary, keep accessory pack on hand for the installation.
