7
Item
Description
53.0
Close pushbutton (black)
54.0
Open pushbutton (red)
58.0
CLOSED/OPEN indicator
59.0
Operations counter
60.0
Mechanism housing
60.1
Mechanism housing cover
104.0
Power supply (green LED shown circled)
105.0
Controller board
105.1
Light-emitting diodes (LEDs)
(red, yellow, green)
105.2
Connector for capacitors
105.5
Power supply connector
106.1
Capacitor board
(two or three depending upon rating)
106.2
Capacitor
106.3
Connector (for each capacitor board)
106.4
Red LED capacitor discharge state
54.0
53.0
105.1
60.1
59.0
58.0
60.0
105.0
106.1
106.1
105.2
106.2
106.4
106.3
105.0
105.2
104.0
Figure 2: Operator controls and discharging capacitors
As-found and vacuum-integrity check
tests
Perform and record the results of both the as-
found insulation test and the vacuum-
integrity check (dielectric) test. Procedures for
these tests are described in the Maintenance
section of this instruction manual beginning
on page 26.
105.5
