background image

Service Manual

Maintenance Instructions

Siemens Ltd. Med India

Version  6.0

Copyright 

 SIEMENS LTD. All rights reserved. For internal use only

8-4

 

 

Do not use scouring powder, organic solvents (may damage
materials) or solvent based cleaning fluids (benzene, alcohol,
spot remove). As is commonly known,the ingredients in
disinfectants are hazardous to your health. Ensure that room is
well ventilated when using any disinfectant. Follow the
instructions for using disinfectants.

 

Do not spray the unit.The cleaning fluid must not seep into the
generator. Substituted phenol based or chlorine releasing
disinfectant can weaken materials and are not recommended.
The same restrictions apply to undiluted solutions with a high
alcohol content (e.g. for disinfecting hands). Disinfectant
sprays should generally not  be used, the spray can seep into
the system,and safety features can no longer be guaranteed
(possible damage to electrical components, formation of
flammable mixtures of air and the solution vapour).

 

 

To disinfect surfaces, we recommend common liquid solutions of aldehyde-based or
ampholytic surfactant -based disinfectant.

8.4 

Product Disposal

 

Legal regulations may contain special prescriptions concerning the disposal of this
product. In order to avoid environmental damage and/or personal injury, please inform
SIEMENS Customer Service if you want to put the unit out of operation and dispose it.

8.4.1  Radioprotection Material

 

Lead in X-ray tube assembly and in Collimator 1.65 kg.

8.4.2  Transformer Oil

 

Oil in X-ray tube assembly, approx. 3.2 kg.

8.4.3  Plastics

 

Epoxy resin on PC boards, PVC of cables approx.  5 kg.

8.4.4  Electrolytic Capacitors

 

These capacitors must be emptied. Please inform the Siemens Customer Service.

 

Capacitors approx. 1.5 kg.

 

Electrolytic Capcitors approx. 5.5 kg.

8.5 

Mechanical Risk

 

The tension in the spring unit must be relieved. Please inform Siemens Customer
service.

 

 

 

 

CAUTION

Содержание 25













Отзывы: