Siemens 1PL618 Series Скачать руководство пользователя страница 24

Страница: 24 / 80

Transport, assembly, and connection

3.1 Transport, storage, and maintenance

A5E00215731A AD

Siemens AG Operating Instructions 2.02 1PL618

Transporting motors with a rotor shipping brace

Motors with cylindrical-roller bearings have a rotor shipping brace (shaft block), in order to

prevent the bearings from becoming damaged during transportation/shipping.
●

Only remove this brace before fitting the drive element.

NOTICE

Take other suitable measures to axially fix the rotor if the motor has to be transported

after you have fitted the drive element.

[ID: 325.01]

3.1.2

Storage

CAUTION

Seizure damage to friction bearings and rolling-contact bearings
If storage conditions are inappropriate there is a risk of bearing seizure damage. This can

result in brinelling, for example.
Read the following notes on storage.

Storing outdoors

Store the machine in a location that meets the following criteria:
●

Choose a dry storage location with plenty of space, which is safe from flooding and free

from vibrations.

●

Repair any damage to the packaging before putting the equipment into storage insofar as

this is necessary to ensure proper storage conditions.

●

Position machines, devices, and crates on pallets, wooden beams or foundations that

guarantee protection against ground dampness.

●

Prevent the machine sinking into the ground.

●

Ensure that the air circulation under the equipment is not impeded.
–

Covers or tarpaulins used to protect the equipment against the weather must not

make contact with the surfaces of the equipment.

–

Covers or tarpaulins must not trail on the floor around the machine.

–

Place wooden spacer blocks between the covers and the machine.

Storing indoors

●

Store the machine in a room that meets the following criteria:
–

Dry, dust-free, frost-free and vibration-free

–

Well ventilated

Содержание 1PL618 Series

















































































Результаты поиска

Содержание 1PL618 Series

Отзывы:

Похожие инструкции для 1PL618 Series

Бренды по названию

Популярные бренды

Siemens 1PL618 Series, Руководство по эксплуатации

Результаты поиска

Содержание 1PL618 Series

Отзывы:

Похожие инструкции для 1PL618 Series

Бренды по названию

Популярные бренды