Siemens Nixdorf PCD-B series Скачать руководство пользователя страница 71

Страница: 71 / 137

Data protection System

operation

Press key F5.

The following message will then be displayed:

Type New Password and Press ENTER Key:

SYSTEM

The SYSTEM password must be 4 to 8 characters in length and may include all

alphanumeric characters. No distinction is made between upper and lower case.

Enter the new SYSTEM password (4 to 8 characters).

Press the Enter key.

The following message will then be displayed:

Verify Password and Press ENTER Key:

Enter the SYSTEM password again as confirmation.

Press the Enter key.

You have now changed the SYSTEM password, and the PC restarts.

Canceling the SETUP and SYSTEM passwords

Restart your PC (Warm boot, reset or switching off/on).

The following message will then be displayed briefly:

While this message is on the screen, press the key combination Ctrl, Alt and Ins.

Enter the SETUP password.

Press the Enter key.

The first page of the SETUP menu will then be displayed.

Press the Pg Up key.

The second page of the SETUP menu will then be displayed.

Press the "cursor down" key until the input field to the right of

SECURITY FEATURES:

marked.

Press the "cursor left" key until the entry you require appears in the input field

DISABLED

A26361-K293-Z1-1-7619

Содержание PCD-B series










































































































































Результаты поиска

Содержание PCD-B series

Отзывы:

Siemens Nixdorf PCD-B series, Руководство по эксплуатации, Страница: 71 / 137

Результаты поиска

Содержание PCD-B series

Отзывы: