Siemens Nixdorf D931 Скачать руководство пользователя страница 38

Страница: 38 / 78

Settings in BIOS Setup

Security features

A26361-D931-Z121-5-7619

Diskette Write - Write protection for floppy disk drive

This field is used to enable and disable floppy disk write-protection.

Enabled

Floppy disks can be read, written or deleted, provided jumper FDP
is not inserted (default entry).

Disabled

Floppy disks can only be read.

Flash Write - Write protection for System BIOS

This field can assign write protection to the System BIOS.

Enabled

The System BIOS can be written to or deleted, provided jumper
FLP is not inserted (default entry). BIOS update from floppy disk
is possible.

Disabled

The System BIOS can neither be written to nor deleted. BIOS
update from floppy disk is not possible

Soft Power Off

This field specifies whether the PC can be switched off with a program (e.g.
SWOFF).
Enabled

The PC can be switched off with a program (default entry).

Disabled

The PC cannot be switched off with a program.

Remote Power On

specifies whether the PC can be switched on from an external device (e.g. fax).
Enabled

The PC can be switched on from an external device (default entry).

Disabled

The PC cannot be switched on from an external device.

Содержание D931















































































Результаты поиска

Содержание D931

Отзывы:

Похожие инструкции для D931

Бренды по названию

Популярные бренды

Siemens Nixdorf D931, Техническое руководство

Результаты поиска

Содержание D931

Отзывы:

Похожие инструкции для D931

Бренды по названию

Популярные бренды