Advanced system settings
Settings in BIOS Setup
A26361-D931-Z121-5-7619
23
Hard Disk Read Ahead 1:
[Disabled]
Hard Disk Read Ahead 2:
[Disabled]
F1
Help
↑↓
Select Item
-/+
Change Values
F9 Setup Defaults
ESC Exit
← →
Select Menu
Enter
Execute Command
F7 Previous Values
Example for submenu
Advanced System Configuration
Hard Disk Read Ahead x
Enabled
More data is read in than necessary each time the hard disk is
accessed. The additional data is buffered and is available for the
next data access. This enhances the performance of hard disk
access.
Disabled
The data required is read in each time the hard disk is accessed.
You must select this setting if you install Windows NT or OS/2
Warp. (Default entry)
Plug & Play O/S
defines the Plug&Play functionality. Plug&Play means that inserted modules are
automatically recognized and installed if they support Plug&Play.
Yes
The operating system takes over some of the Plug&Play functions
(default entry). You should select this setting only if the operating
system supports Plug&Play.
No
The BIOS takes over the complete Plug&Play functionality.
Reset Configuration Data
This field specifies whether the configuration data is reset and reinitialized when
the PC is started.
Yes
When the PC is started the old configuration data is reset. The new
configuration data is determined by means of the Plug&Play
functionality. The mounted modules and drives are then initialized
with this data.
Содержание D931
