background image

Would you like to know more ...

... about this product
... or about another aspect of information technology?

Our Training Centers will be glad to help.
Siemens Nixdorf has Training Centers at strategic
locations in Germany and more than 20 countries worldwide.

Please write to:

Siemens Nixdorf
Area Training Management Europe North
125-135 Staines Road, Hounslow, Middlesex, TW3 3JB
United Kingdom

or call
Ron Johnson, Hounslow
Tel.:  .44 344 850 990
Fax.:  .44 344 850 991

Adaptec is a registered trademark of Adaptec Inc
Pentium is a registered trademark of Intel Corporation, USA.
Microsoft, MS and MS-DOS are registered trademarks and Windows is a trademark of
Microsoft Corporation.
PS/2 is a registered trademark of International Business Machines, Inc.
UNIX is a registered trademark of UNIX System Laboratories.

Copyright 

 Siemens Nixdorf Informationssysteme AG 1993

The reproduction, transmission or use of this document or its contents is not permitted without
express written authority.

Offenders will be liable for damages
All rights, including rights created by patent grant or registration of a utility model or design,
are reserved.

Delivery subject to availability. Right of technical modification reserved.

Содержание D818



























Отзывы: