Siemens Nixdorf D1111, Техническое руководство

Страница: 10 / 21

Important notes
2 - English
U41090-J-Z156-2-74
Important notes
!
Pay attention to the information provided in the manual "Safety, Guarantee and
Ergonomics" and to the following notes. Be sure to read this page carefully and note the
information before you open the device.
•
Store this manual close to the device. If you pass on the device to third parties, you should
also pass on this manual.
•
You cannot access the components of the system board without first opening the device. How
to dismantle and reassemble the device is described in the Operating Manual accompanying
the device.
•
Please note the information provided in the chapter "Safety" in the Operating Manual of the
device.
•
Incorrect replacement of the lithium battery may lead to a risk of explosion. It is therefore
essential to observe the instructions in the chapter „
Add-on modules “ - „ Replacing the lithium
battery “.
•
The lithium battery must be replaced with an identical battery or a battery type recommended
by the manufacturer (CR2032).
•
Do not throw lithium batteries into the trashcan. It must be disposed of in accordance with local
regulations concerning special waste.
•
•
Connecting cables for peripherals must be adequately insulated to avoid interference.
•
Components can become very hot during operation. Make sure you do not touch components
when making extensions to the system board. There is a danger of burns!
The shipped version of this board complies with the requirements of the EEC directive
89/336/EEC "Electromagnetic compatibility".
Compliance was tested in a typical PC configuration.
When installing the board, refer to the specific installation information in the Operating
Manual or Technical Manual of the receiving device.
i
The warranty is invalidated if the device is damaged during the installation or
replacement of system expansions. Information on which system expansions you can
use is available from your sales outlet or the customer service center.