Siemens Healthcare XPRECIA STRIDE Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 59

Siemens Healthcare XPRECIA STRIDE Скачать руководство пользователя страница 39

68

69

Xprecia Stride

User Guide

5. Performing troubleshooting and maintenance

Changing your batteries

Be sure to change the batteries when you see the
battery indicator icon showing low battery. You can use
either standard alkaline or Nickel Metal Hydride (NiMH)
rechargeable batteries.

IMPORTANT

Make sure you set the correct battery type after changing
the batteries.

Changing the batteries

INSTRUCTIONS

1. Press

to turn the power off.

2. Press the latch on the battery compartment cover and

pull it towards you to remove the cover.

3. Pull the battery removal strap to remove the batteries

out of the battery compartment.

4. Noting the correct placement, insert the

3 new AA batteries in the battery compartment.

5. Snap the battery compartment cover back into place.

IMPORTANT

Siemens recommends you not leave Stride unused for long
periods of time with the batteries in the device.

Be sure to replace all 3 batteries at the same time.

Changing your test strip port protective cap

Replace the test strip port protective cap as needed.

Replacement of caps varies based on actual analyzer use.
The cap was designed for a minimum of 2,000 tests and
Siemens recommends you visually inspect it for cracks or
deteriorations and replace as needed.

Refer to the

Analyzer Counters & Memory

tab of the

Xprecia Data Management Software to see how often a
cap has been removed and replaced.

For complete information on using the DMS, refer to the

DMS online help.

Changing the test strip port protective cap

INSTRUCTIONS

1. Press

to turn the power off.

2. Holding Stride in one hand, grasp the test strip

port protective cap with your other hand and
gently pull it off.

3. Align the new test strip port protective cap and

gently snap it into place.

4. Store the test strip port protective cap you replaced in a

safe place for future use.

Be sure the test strip port protective cap is dry and always fully

snapped in place before use.

«
...
37
38
39
40
41
...
»

Содержание XPRECIA STRIDE




























































Отзывы:

Нет отзывов