Siegmund 16002766, Руководство по сборке и эксплуатации

Страница: 9 / 26

NOTICE
Mounting absorptions are not included in the scope of delivery and should be coordinated
individually with the manufacturer.
4. INSTALLATION
The lever is split in two parts for smoother handling ( Pic. 3 ).
Please use the machined area of coverage on the lever to firmly screw it on to the absorption.
Use strong alignments and absorptions according to the emerging forces.
For mounting absorptions, use the mounting positions shown in Picture 4 only.
In case you need other alignment spots, please contact the manufacturer.
M10 standard thread
Spanner flat 13 mm
Spanner flat lever
Pic. 3: Lever assembly
NOTICE
• The unit is designed to apply axial thrust. The unit is not suitable for special applications
with aberrant forces (Cross forces) and off center support and the manufacturer disclaims
any liability.
• Pay attention to clean component parts if you are mounting and dismounting the lever
repeatedly. Unclean threads may result in a higher wear and/or damage on the thread.
• Comply with the accident prevention regulations when mounting the unit.
9