Siegenia KFV BS 6000, Руководство по сборке

Страница: 8 / 64

02.2019 8 / 64 H39.MFVRS009EN-00
Multi-point locks, key operated Assembly instructions
BS 6000 OF/OR, BS 6000, BS 6600
2 Safety
• Before starting the assembly work, read the follo-
wing safety instructions carefully. They are designed
to keep you safe and prevent hazards, injuries and
material damage. Observe all warning notes.
2.1 Structure of the warning notes
The warning notes in these instructions
• when observed, provide protection against potential
personal injury and material damage,
• classify the level of danger by the signal word,
• designate the danger of personal injury via the
hazard sign,
• define the type and source of danger,
• show measures to prevent hazards and prohibit
specific behaviour.
The warning notes are set up according to the following
principle:
SIGNAL WORD
Type and source of danger
Explanation of the type and source of danger
• Measures for the prevention of the danger
The hazard sign designates warning notices that warn
of personal injury.
The type and source of the hazard defines the cause of
the hazard. The potential consequences of non-obser-
vation of warning notices are e.g. danger to life due to
electric shock.
Under measures, actions are listed that must be carried
out for the prevention of hazards or which are prohibi-
ted for the prevention of a hazard.
2.2 Warning notes used
DANGER
The signal word "Danger" designates an immediately
threatening danger. If this hazard is not prevented, it
could lead to death or severe injuries.
WARNING
The signal word "Warning" designates a potential
hazard. If this hazard is not prevented, it could lead to
death or severe injuries.
CAUTION
The signal word "Caution" designates a potentially
hazardous situation. If this hazardous situation is not
prevented, it could lead to minor or moderate injuries.
NOTICE
The signal word "Notice" defines actions for the pre-
vention of material damage. The observation of these
notes prevents damage to the multi-point lock or the
other components.
Information, advice etc.
This symbol indicates special features and designates
facts that require increased attention.
2.3 Warning notes
CAUTION
Risk of injury due to crushing
If the multi-point locks are removed and installed without
the door leaf being lifted off, there is a risk of fingers
becoming trapped.
• Lift off the door leaf or secure it with a fixing wedge
• Wear safety footwear
CAUTION
There is a risk of injury from sharp edges
Cropping metal components creates sharp edges. This
presents a risk of cutting injuries.
• Wear safety gloves
CAUTION
Risk of injury from swarf flying around rapidly
During milling work, there will be swarf flying around
rapidly.
This presents a risk of eye injuries.
• Wear safety goggles