H39.MFVRS006EN-00
02.2019
27/44
Assembly instructions
Multi-point locks, key operated
BS 2100, BS 2800
4.8
Mounting the handle set
Prior to the assembly of the hardware, observe the enclosed assembly instructions of the
manufacturer.
Compare the drilling template for the hardware with the positions of the fixing holes for the
gear box before drilling, see chapter 3.1.4 “Main lock types, key-operated” from page
Dismount the multi-point lock before drilling.
Marking and drilling the holes
f
With the multi-point lock installed, adjust the drilling template,
enclosed with the hardware, on the square spindle and mark the
positions of the holes.
f
Dismount the multi-point lock and drill the holes.
f
Install the multi-point lock again.
Installing the hardware components
f
Insert the square spindle
of the lever handle into the
handle nut.
f
Insert the cylinder lock into
the main lock.
