35 GALLON TANK COMPONENTS & DESCRIPTIONS
1.
Tank Lid
– (spin-on lid) vented, allows access to the tank for filling & mixing
and allows air to displace fluid being pumped out.
2.
35 gallon horizontal tank -
29” overall length, 19” in wide & 18.5” high.
Gallon markers on side. Tapered bottom sump for complete fluid pick-up,
draining and cleaning.
3.
Buckle & Straps
– Secures tank to sprayer frame.
4.
Suction Fitting Assembly
– Connected to the pump suction line and located
just off the bottom of the sump in the tank. The fitting is raised off the bottom
slightly and has two ¼” holes in the end to prevent unmixed chemical
powder and to filter out large chunks of unmixed chemicals, shading or
debris in the water such as chemical packaging materials.
5.
Suction Hose
– ¾” non-reinforced hose. Supplies water/chemical to pump.
6.
Filter assembly
– Mounted in the supply line to remove dirt & sediment
before the fluid enters the pump. The 4 main components are the housing
assembly, bowl, gasket and screen.
7.
Filter Bowl & gasket.
8.
Mesh Filter screen
– 3 screen sizes are available for various applications;
30, 50 & 80. Siebring Fox sprayers are delivered with # 80 screens unless
otherwise specified.
9.
Plastic Street Elbow
– connects suction fitting assembly with the suction
hose and the by-pass assembly with the bypass hose.
10. Drain valve
– Located in the lowest part of the tank for tank draining. Male
threads are ½” NPT.
11. By-pass hose
– Approximately 10% fluid by-pass from the unloader returns
to the tank to agitate fluids and for suspending wettable powders.
12. Back-flush Assembly
– Installed in the suction line, the assembly has an
adapter to connect a standard garden hose in line to the pump. The fitting
can be used for flushing, cleaning and winterizing.
12
(See page 13 for tank & component diagram)
