Functions of the Terminal
14.6.1
TRANSPARENT MODE for USB
The USB TRANSPARENT MODE is automatically recognised as soon as a connection
to the PC via the USB interface has been established.
The related note appears on the display:
In this mode, the operating terminal reads the data and commands of the PC user inter-
face via the USB interface and forwards them to the drive via the first RS232 port. The
answer of the drive is read by the first RS232 port and forwarded to the PC user inter-
face via the USB interface. During this time, the operating terminal is inactive.
If the connection to the PC is interrupted, the operating terminal will switch back to the
previous mode.
14.6.2
TRANSPARENT MODE for RS232
Note
With software version (operating terminal) 3.17 and higher, the menu item “RS232 Trns-
Mode” is not available anymore.
You can select the RS232 TRANSPARENT MODE via the menu item “RS232 Trns-
Mode”.
The related note appears on the display:
In this mode, the operating terminal reads the data and commands of the PC user inter-
face by the second RS232 port and forwards them to the drive via the first RS232 port.
The answer of the drive is read by the first RS232 port and forwarded to the PC user in-
terface via the second RS232 port. During this time, the operating terminal is inactive.
Via the ESC key, you can exit this mode.
14.7
RESET
Depending on the PCB version and the software version of the terminal, you can restart
the terminal application either by means of the cursor keys or via the menu item TER-
MINAL RESET.
Cursor keys
Up to PCB version 036210043.2, up to software version (operating terminal) 3.xx
A reset (warm boot) allows to restart the operating terminal application in the AU-
TOMATIC MODE and in the TRANSPARENT MODE. A possible bridge at COM2 is left
unconsidered.
38
Drive System SD2x - Operating Terminal 0362150 and 0362153
