Functions of the Terminal
14.3.1
Enter password
Some menu items can only be accessed if you enter a 4-digit password. The password
that you enter here will be matched with the stored password.
If the password is correct, you can access the selected menu item. If the entered pass-
word is incorrect, a corresponding error message will be displayed for one second and
you will be returned to the PROGRAM MENU.
Note
You can set the password via the menu item CHANGE PASSWORD.
14.3.2
PARAMETER MENU
In the PARAMETER MENU, you can select different parameters and edit them.
Up to software version (operating terminal) 3.08:
If the drive control is not set to “Serial interface / RS485 / USB”, an error message will
be triggered and the display will switch back to the main menu.
Software version (operating terminal) 3.09 or higher:
The modified parameters will only become active in the drive if the selected setpoint
channel supports these parameters.
Software version (operating terminal) 3.17 or higher:
The operating terminal checks the user rights that are stored in the drive. To edit the pa-
rameters, the user right “Parameter input via terminal” for the OEM level and also for the
user level must be activated in the
drivemaster2
user interface. This user right must be
activated individually for all parameter sets of the drive.
If the parameter input via terminal is activated (default setting), the parameters are dis-
played and you can edit them. If the parameter input via terminal is deactivated, the er-
ror message “function not allowed” will be displayed for one second and the display will
switch back to PROGRAM MENU.
30
Drive System SD2x - Operating Terminal 0362150 and 0362153
