SIDESHIFT INSTALLATION GUIDE
V1.9
21
Model HB340
Refer to HB340 schematic on page 11 for complete system layout
1.
Position the control module in a dry location near the motor control
module.
2.
Connect the red(Positive) and black(Ground) leads from the 4 pin motor
control cable to the “12v Positive” and “Common Ground” terminals on
the battery bank.
3.
Connect “Common Ground” and “battery pos” on the battery to “battery
neg” and “battery pos” on the motor control module.
4.
Connect the green and blue leads from the 4 pin motor control cable to
“switch 1” and “switch 2” on the motor control module.
5.
Plug the 4 pin motor control cable into the black wireless control module.
6.
Plug the 6 pin actuator cable into the black wireless control module.
NOTE:
The joystick and wireless key fob are preprogrammed for operation.
No pairing or programming is required.
