8
PJC-222
1.0.6 - 2012
PANEL
PANEL SETUP
BACKLIGHT LEVEL
Set level of panel backlight in daylight mode, 1-5
NIGHTLIGHT - COLOR
Select color of backlight in nightlight mode:
GREEN, BLUE, RED, WHITE
NIGHTLIGHT - LEVEL
Set level of panel backlight in nightlight mode, 1-3
TIMER AUTO OFF
Set the time from last use to auto panel shutdown.
Set from 5-60 minutes in 5 minute steps or OFF (panel will
not turn off automatically)
OK:
Saves changes and returns to main menu
Select: Selecting parameter
Cancel: Returns to main menu without saving changes
Use stern joystick to change value up or down
DEFAULT
DEFAULT SETTINGS
Reset all settings to factory default - follow instructions on screen
Start: Resets system to default factory settings
Cancel: Returns to main menu without changes
INFO
INFO
The info selection is a service screen.
Choose the Info screen if you wish to check your system.
Use joystick to highlight desired choice.
Select : Selects highlighted info menu.
Back : Returns to main menu.
PANEL INFO
Shows panels firmware version, hardware version, serial number
and S-Link voltage into the panel.
Back : Returns to Info menu.
HYDRAULIC INFO
Shows system pressure and oil temperature.
Thruster can be operated with the joystick.
STOP: Emergency stop – Activates dump valve and Stop thrusters.
Back : Returns to Info menu
AC THRUSTER INFO
Shows AC thruster temperature and rpm for every AC thrusters
installed. Blank square indicates no AC thruster installed in this
instance.Thruster can be operated with the joystick.
STOP: Emergency stop – Stop thrusters.
Back : Returns to Info menu.
