Side-Power S-linkControl Panel PJC211, Инструкция по установке и эксплуатации

Страница: 5 / 12

5 PJC-211
1.1.1 - 2012
MENU SYSTEM:
Access menu system by pressing Menu button (middle ‘ON’ button)
for 3 seconds
Move around in menus by using joysticks
Follow instructions on the screen and press buttons as indicated on
LCD screen
LANGUAGE
SETUP
LANGUAGE
Choose language by moving bow joystick:
English, Norwegian, German, French, Spanish and Italian.
SETUP
Use joystick to choose function
Select: Opens selected function
Cancel: Returns to Main Menu
SYSTEM DEVICES
View all devices connected to S-Link and manually change setup
values.
Slide between devices with the joystick to see device information as
location, thruster direction, retract type, firmware version and serial
number.
Edit: Change location to BOW, STERN, BOW-PORT or STERN-
PORT, thruster direction to Normal or Inverted or retract
type. For Automatic main switch 1 8977 and interface 8730,
you can only change location. Use joystick to alter values.
Location:
Can change selected device location between BOW , STERN,
BOW-PORT or STERN-PORT. For PPC800 or SR61242 only.
(use BOW-PORT on second bow thruster and STERN-PORT
on second stern thruster)
Direction:
Can change thruster direction to Normal or Inverted. Change
this value if the thruster is running in the wrong direction.
For PPC800 or SR61242 only.
Retract:
Setup retract types. For PPC800 or SR61242 only.
Normal: stand alone,use this for PPC800 without any
retract or SR61242 (SR80/100) without
PPC800 or SR150000 (SR130/170/210)
without PPC800.
Type 1: Retract SR61242 (SR80/100) with PPC800,
both devices needs to be set to Type 1.
Type 2: Retract SR150000(SR130/170/210) with
PPC800, both devices needs to be set to
Type 2
WHEN INSTALLING A RETRACT THRUSTER WITH
SPEED CONTROL (PPC800), DO NOT TRY TO RUN THE
THRUSTER UNTIL YOU HAVE COMPLETED THE ENTIRE
SETUP PROCEDURE CORRECTLY!
This is to prevent damage to the thruster caused by running
the thruster while the retract mechanism is not fully opened.
OK : Saves changes and quit editing.
Select : Switch between Location, Retract and Retract settings.
Cancel : Cancel operation without saving changes.
Cancel: Returns to “SETUP” –menu.
NB! NB!