Siddons Solarstream MAHRW015WAA, Руководство пользователя

Страница: 10 / 17

7
2.2 Initial Power On and Standby Status
After first powering on, the remote controller will show the full screen display. After 10 seconds, it will
show the Standby status with storage tank temperature, ambient air temperature and clock showing.
Initialization status
C C
ELEC
CLOCK TIMER
Standby status
2.3 ON/OFF Control
ON/OFF button. Press this button to power on and off. In the ON mode, the remote controller
displays the operation mode, clock, timing status, bottom of water tank temperature and ambient temperature.
Notice:
When the heat pump is turned on for the first time, the default 3 minute delay is not operational,
but will revert from the second time it is turned on.
Hot water
tank temperature
Ambient
temperature.
C C
ELEC CLOCK TIMER
OUT
OUT
2.4 Electric Heater Control
NOTE: The electric heater control is not applicable to Australian BOLT-ON Heat Pump models.
A: Independent electric heater mode:
Under the turn off status, press the button, you can turn on the independent electric heater mode the
sign of display on the interface like the picture 1. press the button again turn off the independent
electric heater mode like the picture 2.
B: Auxiliary electric heater mode:
Under the turn on status, press the button, you can turn on the auxiliary electric heater mode, the sign
of display on the interface like the picture 1. When the delay time which is begin when you turn on the
unit is longer than the parameter of 3 setting, the electric heater signal will output. Press the button again
turn off the auxiliary electric heater mode like the picture 2.
ELEC
IN
C C
ELEC CLOCK TIMER
IN
C C
CLOCK TIMER
picture 1 picture 2
IN
C C
ElEC
CLOCK TIMER
IN
C C
ElEC
CLOCK TIMER
picture 1 picture 2
ELEC
ELEC
ELEC
OUT OUT
OUT OUT
ELEC
NO ROOM OUT VALVE
1
2
C
%
C
%
CLOCK TIMER
IN
ELEC
SET
TEMP
HUM
FAN