EN SICO KITCHENWARE®
NATURAL LABORATORY FOR VACUUM PACKAGE EN
MANUFACTURER : BISVA SRL TITO PZ ITALIA
4
HOW IT WORKS WITH EMBOSSED ROLLS
The use of rolls allows to create bags of the length you need. Cut a piece of roll. It is necessary to place the side
to seal on the sealing bar, without wrinkles and without going beyond the inferior seal gasket. Set up the sealing
time on high values and proceed as described for the vacuum packing of embossed bags.
BAGS CARE
Before buying bags, make sure of their suitability to vacuum preservation. S.I.C.O. KITCHENWARE® assures
the suitability of its items to vacuum preservation. It is essential to take great care of the bags used
before and
after
vacuum-packing. Accidental piercing would make these bags useless. When vacuum-packing food with
points or acuminated protrusions, remember to wrap it in soft paper napkins and/or silver paper so as to protect
the whole bag. It is advisable to keep them far from children.
VACUUM PACKING IN CONTAINERS
S.I.C.O. KITCHENWARE offers different lids which allow to vacuum-pack by using containers characterized by
the capacity you need. Apart from the
lids, you need another accessory called “vacuum handle“. Remember not
to fill the container and leave 3 cm. at least from the upper rim
WARNING: TEMPERATE GLASS, STEEL CONTAINERS ONLY BECAUSE THEY DO NOT
IMPLODE UNDER THE DEPRESSION CAUSED BY THE VACUUM PUMP.
TRITAN LIDS
Step 2
.
Program
the
selector (5) on position JARS
to vacuum-pack containers.
The pump will be set in motion.
Insert the handle on the lid and
press after removing
the
security screw.
Vacuum Handle
Step 1
.
Plug
the
appliance in, lift the lid
(11) and position the
general switch (1) on
position ON. Put the
handle pipe into the
proper accessory port
(16). Check the presence
of the silicone valve on
the lid.
Step 3
.
When the vacuum gauge (4)
reaches the MAX value, it will be
possible to remove the vacuum handle
from the lid. It is possible to go on sealing
or positioning the selector (5) on 0 to
switch the pump off.
Step 4
.
To
open
a
vacuum-packing
container,
use your fingers to remove
the silicone valve placed
where you had inserted the
handle to vacuum-pack so as
to allow the entry of air and
the opening of the lid. Always
leave the valve o the lid.
.