EN SICO KITCHENWARE®
NATURAL LABORATORY FOR VACUUM PACKAGE EN
MANUFACTURER : BISVA SRL TITO PZ ITALIA
4
HOW IT WORKS WITH EMBOSSED ROLLS
The use of rolls allows to create bags of the length you need. Cut a piece of roll. It is necessary to place the side
to seal on the sealing bar, without wrinkles and without going beyond the inferior seal gasket. Set up the sealing
time on high values and proceed as described for the vacuum packing of embossed bags.
VACUUM REGULATION
(only for S 250 Premium)
It is necessary to replace the filter cover with the vacuum regulator accessory.
S250PLUS
Step 8
.
Release the lid by keeping
the vacuum chamber opening button
pressed
(14).
Check
the
homogeneity of the sealing and
preserve the package from casual
piercings that would cause the loss
of vacuum. ADVICE: Wait a few
seconds before releasing the lid so
as to have a better sealing.
Step 9
.
Lift the lid, check the
homogeneity of the sealing and
preserve the package from casual
piercings that would cause the loss of
vacuum.
Step 7*.
If the selector
(6) is set on the MAN
position, when the vacuum
gauge (4) has reached the
MAX value it will be
necessary to start the
sealing MANUALLY with
button (7).
For S250PLUS
it will be necessary to start
the sealing by keeping the
button (7) pressed until the
vacuum packer stops.
Step.1
Program
selector (5) on
position AUTO.
for
automatic
cycle.
Step.2
Set Sealing time
on minimum value 1
Step.3.
Set the regulator on the right.
Step 4.
Insert the vacuum bags in the
vacuum chamber, press the lid and
cover the hole of vacuum regulator
until reaching the level of vacuum
desired inside the bag.
Step 5
Push and release the manual
sealing switch(7) and press the
lid until the sealing indicator
switches off.
Step 6.
Set the vacuum regulator on the
central position
Step 7
Push and release the lid. The
machine will stop at the end of the
cycle.