EN SICO KITCHENWARE®
NATURAL LABORATORY FOR VACUUM PACKAGE EN
MANUFACTURER : BISVA SRL TITO PZ ITALIA
2
LEGEND
1.
General switch: if it is lighted, it indicates that the appliance is on and ready to be used.
2.
Sealing time: it allows to set up the sealing time depending on the thickness of the bag to be sealed.
3.
Sealing indicator light: when the light is on, the packer is sealing a bag. When the light goes out, the
sealing process is finished.
4.
Vacuum gauge: it measures vacuum value.
5.
Jars/Bags Selector: it allows to program the packer to vacuum pack in Bags (Position II) or in Jars
(Position I).
6.
Auto/Man selector: If the selector is set on the
AUTO position
, the sealing process will be automatic.
If it is set on the
MAN position
, it will be necessary to start up the sealing manually
7.
Sealing start button : manual sealing.
8.
Upper airtight basket:. it guaranties that vacuum will be maintained in the chamber.
9.
Lower airtight basket: it guaranties that vacuum will be maintained in the chamber.
10.
Silicone gasket: it presses the bag on the sealing bar.
11.
Lid
12.
Sealing bar: When the light is on, the sealing bar is sealing bags. Avoid touching the bar after sealing
to prevent burnings.
13.
Pump protection filter: the filter gathers possible liquids and/or dust which could damage the pump. It
can be drawn out, cleaned and inserted properly.
14.
Vacuum release button: it allows to release the lid after finishing the sealing(
only S250 Plus
).
15.
Plastic bracket: it is used to stop the bag during vacuum process. It is extractable to cleen vacuum
chanber
16.
Accessory port.
8
10
13
11
12
15
16
5
6
7
4
2
1
3
14
(
S250 PLUS)
4 (
S250PLUS)
9