SICK WSE16 Series, Руководство по эксплуатации

Страница: 12 / 110

LED indicator/fault pattern Cause Measures
Yellow LED flashes Distance between sender
(WS) and receiver (WE) is too
large / Beam of WS is not
completely on WE or WE is not
aligned to WS Check sensing range, see
figure 7
Check alignment
yellow LED lights up, although
an object is in the path of the
beam. The beam of light of a photo‐
electric through-beam sensor
hits the receiver of another
(neighboring) photoelectric
through-beam sensor Swap the sender and receiver
arrangement at every sec‐
ond through-beam photoelec‐
tric sensor and ensure that
there is sufficient distance
between the through-beam
photoelectric sensors,
see
figure 4
8 Disassembly and disposal
The sensor must be disposed of according to the applicable country-specific regula‐
tions. Efforts should be made during the disposal process to recycle the constituent
materials (particularly precious metals).
9 Maintenance
SICK sensors are maintenance-free.
We recommend doing the following regularly:
• Clean the external lens surfaces
• Check the screw connections and plug-in connections
No modifications may be made to devices.
Subject to change without notice. Specified product properties and technical data are
not written guarantees.
8
DISASSEMBLY AND DISPOSAL
12
8020353 | SICK
Subject to change without notice