1
About this document
1.1
Function of this document
This document is an Addendum to the MARSIC300 Ship Emission Measuring Device
Operating Instructions.
It supplements the Operating Instructions with all important information required for
device maintenance that deviates from the Operating Instructions.
1.2
Target group
This document is intended for technicians (persons with technical understanding) who
maintain the measuring system.
Requirements for the maintenance personnel
•
The technician must be familiar with the exhaust gas technology of the operator's
plant (overpressure, toxic and hot sample gases) and be able to avoid hazards
when working on gas ducts.
•
The technician must be familiar with handling compressed gas cylinders (test
gases).
•
The technician must be able to avoid hazards caused by noxious test gases.
•
The technician must be familiar with gas lines (PTFE lines) and their screw fittings
(be able to ensure gas-tight connections).
•
Only allow an authorized electrician to work on the electrical system or electrical
subassemblies.
1.3
Further information
•
Operating Instructions MARSIC300
•
Technical Information MARSIC300
•
Operating Instructions SFU Gas Sampling System
•
Operating Instructions Sample Gas Line
•
System documentation
•
Short instructions for MARSIC300
•
Safety information (for SICK analyzer devices)
1.4
Symbols and document conventions
1.4.1
Warning symbols
Table 1: Warning symbols
Symbol
Significance
Hazard (general)
Hazard by electrical voltage
Risk of explosion
Hazard by acidic substances
1
ABOUT THIS DOCUMENT
4
A D D E N D U M T O O P E R A T I N G I N S T R U C T I O N S | MARSIC300
8026470/AE00/V1-0/2021-04 | SICK
Subject to change without notice
